Materials Science And Technology (Ms&T) 2006: Product Manufacturing
点此进入淘宝搜索页搜索分类: 图书,进口原版,Professional & Technical（专业与技术类）,Engineering（工程学）,Materials Science,
品牌: Materials Science and Technology
基本信息出版社:Wiley; 1 (2010年4月19日)平装:694页正文语种:英语ISBN:0873396499条形码:9780873396493商品尺寸:27.8 x 21.4 x 3.6 cm商品重量:1.6 KgASIN:0873396499商品描述目录Joining of Advanced and Specialty Materials Including Affordable.Joining of Titanium and Joining Technologies for MMCs.
Brazing/TLP.Roll-Bonded Clad Metal Foils as Ag-Cu-Ti Active Brazing Filler Metals (L. Chen, R.P. Willis, P.F. Lynch, and J. Kaiser).Phase Evolution in the Pd-Ag-CuO Air Braze Filler Metal Alloy System (J.T. Darsell, and K.S. Weil).Room Temperature Device Attach with Reactive Multilayer Foils (M. Powers, Z. He, J. Levin, J. Subramanian, D. Van Heerden, P. Cassanego, and R. Warner).Joining of Ion Transport Membranes Using a Novel Transient Liquid Phase Process (P.G. Callahan, and D.P. Butt).Affordable Joining of Titanium Alloys.Microstructure, Texture, Local Tensile Properties and Residual Stress Relief in Ti-6Al-4V Linear Friction Welds (M. Karadge, P. Frankel, A. Steuwer, C. Lovell, S. Bray, P.J. Withers, and M. Preuss).Fusion Welding.Hybrid Welding Technology of Advanced High Strength Steel (Y. Adonyi, and V. Jurko).Joining of Superaustenitic Stainless Steels: A New Approach (T.D. Anderson, M.J. Perricone, and J.N. DuPont).Solid State Phenomenon and Brazing.A 3-D Coupled-Field Dynamic Model for Ultrasonic Consolidation (C. Zhang, X. Zhu, and L. Li).On the Massive Transformation from Ferrite to Austenite in Laser Welded Mo-Bearing Stainless Steels (M.J. Perricone, T.D. Anderson, J.N. DuPont, and C.V. Robino).Characterization of Different Alumina-Aluminum Alloys Interfaces during Wetting Experiments (E. Rocha-Rangel, P.F. Becher, and E. Lara-Curzio).Friction Stir Welding II.Metal Flow in Friction Stir Welding (A.C. Nunes, Jr.).Friction Stir Welding of 5mm Titanium 6Al-4V (R.E. Jones, and Z.S. Loftus).Lead-Free Soldering: It Is Here to Stay – Applications, Alloy Development, and Impact.Thermodynamics and Interfacial Properties of Lead-Free Solders.Effect of Ni and Ag on Interfacial Reaction and Microstructure of Sn-Ag-Cu-Ni-GeLead-Free Solder (H. Watanabe, N. Hidaka, I. Shohji, and M. Ito).Formation of Micro Joints with High-Melting Point through Rapid Reaction between Sn-3.5Ag Solder and Ni-Fe Alloy Substrate (H. Ozaki, T. Yamamoto, T. Sano, A. Hirose, K.F. Kobayashi, M. Ishio, K. Shiomi, and A. Hashimoto).Kinetics-Based Modeling of Substrate Dissolution and IMC Growth during Soldering (M. Faizan, and G.-X. Wang).Modelling of Thermodynamic, Thermophysical and Physical Properties of Lead-Free Solder Alloys (N. Saunders, Z. Guo, P. Miodownik, and J.-P. Schillé).Mechanical Properties of Lead-Free Solders and Solder Joints I.Effect of Thermal Cycling on Repaired Lead and Lead-Free Solder Joints (M.J. O'Keefe, M. Perez, K. Doering, V. Eckhoff, R. Colfax, D. Murry, S. Vetter, and D. Kleine).Creep Behavior and Microstructure of Sn-Ag-Cu-Ni-Ge Lead-Free Solder Alloy (N. Hidaka, H. Watanabe, M. Yoshiba, M. Shimoda, T. Asai, and M. Ono).Mechanical Properties of Lead-Free Solders and Solder Joints II.Properties of Bi-In-Sn Ternary Alloys for Low-Melting Point Solders (M. Kondo, Y. Akada, A. Hirose, and K.F. Kobayashi).In RoHS Testing – Lead-Free Is Not Always Trouble-Free (D. Kluk, A. de Krom, and C. D’Agostino).Machining and Grinding of Engineered Materials.Session I.Effect of Agglomeration on the Performance of Alumina Abrasives (L. Vedhavalli, and V.E. Annamalai).Laser Surface Engineering of Alumina Ceramic Compacts: An Approach of Laser Dressing (S.P. Harimkar, and N.B. Dahotre).The Effect of Rake Angle on the Mechanics of Metal Machining and Surface Topography (V. Murti, T.A.J. Reddy, M.R.L. Reddy, and K. Sudhakar).Tool Wear Under High-Speed End Milling of Ti-6A1-4V Alloy (K. Sekiya, Y. Yamane, K. Yamada, and N. Narutaki).Processing and Performance of Beryllium.Performance of Beryllium.Processing Aluminum Beryllium (D. Hashiguchi).Steel Product Metallurgy and Applications.High Strength Steels.Microstructure Control for High Strength Structural Steels Using Lower Bainite (J. Shimamura, K. Ooi, M. Okatsu, N. Ishikawa, and N. Shikanai).Microstructure Engineering of Hot-Rolled Advanced High Strength Steels (M. Militzer, F. Fazeli, D. Liu, and V. Prodanovic).A New Method of Characterizing and Quantifying Complex Microstructures in Steels (J. Wu, C.I. Garcia, M. Hua, W. Gao, K. Cho, and A.J. DeArdo).Expanded Use of Vanadium in New Generations of High Strength Steels (S. Zajac).Precipitation Behavior of Vanadium in a High Nitrogen and Vanadium Bearing Steel Treated with TMCP (X. Liang, J. Shen, S. Jiao, and C. Wang).The Transformation and Strengthening Behavior of V-N Steels during Hot Strip Mill Simulation (C.I. Garcia, M.J. Hua, W. Gao, R.J. Glodowski, and A.J. DeArdo).Effect of Alloy Modifications on HAZ Microstructure and Properties of HSLA X80 Pipeline Steel (T.E. McGurk, J.G. Speer, and D.K. Matlock).Effect of Redundant Strain and Accumulated Strain on the No-Recrystallization Temperature of Low Carbon Microalloyed Steel (A.M. Elwazri, G. Vespa, E. Samuel, and S. Yue).High Strength Steel Rock Bolt for Underground Mine Application (D. Karmakar, P.K. Maini, B.K. Jha, and S.K. Chaudhuri).Mechanisms.Contribution of Dynamic Recrystallization to Microstructural Refinement of As-Cast Grains in Nb Microalloyed Steels (P. Uranga, A.I. Fernandez, B. Lopez, and J.M. Rodriguez-Ibabe).Characterization of Nb-Rich Phase Precipitation Near Internal Cracks in Continuously Cast Slabs (Q. Tian, Y. Chen, J. Chen, G. Xu, and Y. Zheng).On the Fractal Nature of Acicular Ferrite, and V(C,N) Precipitation in Medium Carbon Microalloyed Steels (R. Villegas, A. Redjaimia, M. Confente, and M.T. Perrot-Simonetta).Relation between Fatigue Crack Initiation and Propagation, Toughness and Microstructure in Large Blooms for Automotive Plastic Molds (D. Firrao, P. Matteis, G.M.M. Mortarino, M.R. Pinasco, E. Stagno, R. Gerosa, B. Rivolta, G. Silva, and A. Ghidini).Corrosion Behavior of Nb-Bearing Austenitic Stainless Steels in NaCl Solution (A.S. Hamdy, E.H. El-Shennawy, and T. El-Bitar).The Effects of the Precusors Preparation Technology on the Performances of Stainless Steel Foam with 3-D Open Cells Networks Structure (X.Y. Zhou, J. Li, and Y.X. Liu).Lower Strength Steels.Thermo-Metallurgical Model of the Cooling Table for a Flat Product Hot Rolling Mill (G. Gomez, J. Schicht, T. Perez, M. Goldschmit, and A. Vigliocco).A Numerical Dilatometric Analysis of Steels Considering the Temperature Gradient in Specimen Due to Induction Heating (Y.-G. Cho, S.-J. Kim, Y.-R. Im, G. Kim, and H.N. Han).Abnormal Grain Growth in Fe-1%Si Driven by Stored Energy Differences (T. Bennett, P.N. Kalu, and A.D. Rollett).Material Application of Low Carbon Steel with Residual Boron for Hydroforming Operations (C. Chiriac).Development of Heat Treatable Steel Having High Formability (H.C. Shin, K. Lee, C.H. Lee, K.C. Park, and G. Kim).Characterization of Microstructure and Fracture Surface of Ultra Low Carbon Steel with Very High Toughness (S. Jiao, Y. Wang, C. Wang, and X. Liang).Poster SessionInfluence of Coke Combustion Processes on the Dynamic Changes of Cupola Melting Furnace (K.S. Abdel Halim, M. Abdelrahman, and M.I. Nasr).Surface Protection for Enhanced Materials Performances.Thermal Barrier Coatings.Selected Microstructural Observations in Thermal Barrier Coatings by Transmission Electron Microscopy (J. Liu, B. Jayaraj, and Y.-h. Sohn).Mechanical Behavior and Residual Stresses.Indentation of a Multi-Layered Solid Cylinder for the Measurement of Thermal Barrier Coating Adhesion (Q. Ma, J. Beuth, G. Meier, and F. Pettit).Functional Intermediate Layers for the Improvement of Thermal Barrier Coatings Performance (C.R.C. Lima, and J.M. Guilemany).Influence of Ceramic Powders on Structure and Properties of the Hot Work Tool Steel Alloyed with the High Diode Power Laser (L.A. Dobrzańskia, E. Jonda, and K. Labisz).Surface Modifications and Protection for Enhanced Performance II.A New Mechanochemical Method for Armouring or Coating of Metallic Surfaces (S. Komarov, S.H. Son, S. Kaloshkin, O. Abramov, and E. Kasai).Aluminum - Based Composite Coatings Deposited Using Gas Dynamic Spray (J. Jiang, and L. Xue).Surface Modification of UNS 430 Stainless Steel Via Spinel Coatings (M.R. Bateni, P. Wei, X. Deng, and A. Petric).Characterization of Alkaline Cleaned and Cerium Oxide Coated Al 2024-T3 (P. Jones, A. Padwal, P. Yu, M.J. O'Keefe, W. Fahrenholtz, and T. O'Keefe).Poster Session.Laser Surface Melting of Aluminum Alloy 6013 for Improving Stress Corrosion Cracking Resistance (W.L. Xu, T.M. Yue, and H.C. Man).The Impact of Design on Corrosion Performance.Corrosion Behavior of Aluminum, Iron, Nickel and Other Alloys.The Effects of Alloy Composition on the Passivation Layer Parameters of Al-Zn Alloy Systems (N.E. Idenyi, C.E. Ekuma, and I.O. Owate).Corrosion Case Study - Under-Hood Front End Accessory Drive Bracket (FEAD) Applications (G.T. Bretz, M. Maj, N. Li, and J. deVries).Correlation between Metallurgical Properties and Hydrogen Permeation in Carbon Steels: A Neural Network Model Approach (F.A. Reyes-Valdés, F. Avila-Murillo, R. Colás-Ortiz, L. Torres-Treviño, A. Martínez-Villafañe, E. Saucedo-Salazar, and S. Solís-Rosales).Selection of Corrosion Resistant Materials for Nuclear Waste Repositories (R.B. Rebak).The Materials Competition.Building on the 2006 ASM/TMS Distinguished Lecture.Using Process-Based Cost Modeling to Determine the Effects of Product Family Decis...
